Frame checked for rust and straightness and was sound. Replaced support brackets for body and all bushings. Both axles were rebuilt front axle is now a corporate 10 for the power steering to work. Rear axle is original with locker installed. Both gearings are 3:42 Tires newer and I have the original one year hub caps. Upholstery has been replaced. Two seats only no middle seat they are 2k if you find one. Headliner replaced as well as visors covered. Original instructions for the placement of 4x4 still on the header between the visors. Radio in place but no wired. Cigarette tray in place lighter currently not. I will replace this or you can depending on offers. Installed tach on newer gauge setup as the previous speedo blew up. Same year gauges no change. Rockwell T221 transfer case I have an NP205 rebuilt that will go with the vehicle. I have the original air cover and fan I changed both for fuel eco. Currently a 327 1967 4 barrel engine with around 18k on the motor with a small RV cam installed. Dual exhaust connected to the ram horn exhausts. Wiring all replaced as well can't forget that one. Questions just ask!